Certain chemicals are identified as highly toxic and are now heavily restricted. Products containing these chemicals are still being discarded, and so this type of waste must be handled with great care.
PCBs and PCTs are manmade chemicals that were produced on a large scale across the world between the 1930s and 1980s. They were used in particular in lubricants and in electrical and hydraulic equipment. They are pervasive, and have since been detected in soil, surface and ground water, as well as in food. They are now classified as probable human carcinogens and produce a various adverse effects in both humans and animals.
Several countries limited the use of PCBs and PCTs in the 1970s. Their use and marketing has been very heavily restricted in Europe since 1985.
The Directive on the disposal of PCBs/PCTs aims to ensure the environmentally sound disposal of these chemicals and of the equipment containing them as soon as possible.
EU countries much ensure that they
- make inventories of big equipment containing PCBs or PCTs
- adopt plans for the disposal of this equipment, and safely dispose of it (deadline for disposal was the end of 2010)
- prepare outlines for collecting and disposing of non-inventoried equipment containing PCBs and PCTs (such as most household appliances manufactured prior to the ban on these chemicals)
Under the recast of the POPs Regulation in 2019, all remaining PCBs within dielectric equipment in concentrations above 0.005% and in volumes greater than 50 ml must be destroyed or irreversibly transformed by the end of 2025 at the latest.
- 31 December 2025Upcoming deadline
For all remaining PCBs within di-electric equipment in concentrations above 0.005% and in volumes greater than 50 ml to be identified and removed from use.
At the end of 2010, EU counties had to decontaminate or dispose of equipment containing PCB volumes of more than 5 litres. This did not apply to transformers containing between 0.05 % and 0.005 % by weight of PCBs or PCTs, which could be disposed of at the end of their useful lives.
- 16 September 1999Member States sent inventories of equipment with PCB volumes of more than 5 dm³ to the European Commission.
- 16 March 1998Deadline for EU countries to incorporate the Directive into national law
- 16 September 1996Directive on the disposal of PCBs/PCTs enters into force
- Report on Support to selected Member States in improving hazardous waste management based on assessment of Member States' performance - this report contains an analysis of PCB waste management practices in selected EU Member States.
- Commission Decision 2001/68/EC of 16 January 2001 establishing two reference methods of measurement for PCBs pursuant to Article 10(a) of Council Directive 96/59/EC
Main law: Directive on the disposal of PCBs/PCTs
Entry into force: 16 September 1996
Related Commission priorities: European Green Deal
For questions about EU environmental policy, please contact Europe Direct.